Wear Protection

Protect your assets and extend your equipment service life with our range of Fenner Conveyors wear protection products.

With over 100 years of rubber manufacturing experience, we know rubber better than anyone. We use this knowledge to produce only the best rubber sheeting products.

Cured Rubber

Uncured Rubber

The key advantages of Fenner Conveyors' cured rubber sheeting include:

Exceptional wear resistance;
Safe to handle;
Fully ozone resistant (ISO 1431);
Excellent adhesion capabilities; and
Low maintenance / easy cleaning.

Designed and developed strictly in accordance with DIN 7715 international standards Fenner cured rubber sheeting is available in 60º Shore A and 40º Shore A in a range of thicknesses, widths and roll sizes with or without an Adhesion Layer (AL).

Bonding System

Fenner Conveyors cured rubber sheeting can be bonded to most surfaces using the majority of good quality cold bonding systems available in the market. In applications where an AL is used there is no need for time-consuming grinding prior to bonding. The AL is protected by a plastic film, which enables rapid processing. The combination of high adhesion and high tensile strength in the AL ensures maximum bond strength and increased reliability.

Wear Liners

Ceramic Wear Impact Pads
Rubber Wear Impact Pads (Steel Backed, Aluminium T-Track, Serrated)
Lifter Bars
Impact Bars

Uncured Rubber Sheeting

We manufacture a range of uncured calendered rubber sheet in various compounds to suit all applications. We typically supply in in 13.1 metre rolls in varying widths and thicknesses up to 15 mm crated and 18 mm bubble wrapped.

The table below provides a sample of our uncured rubber range

CODING	DESCRIPTION	COLOUR	DURO HARDNESS SHORE A +/-5	CURE METHOD	MAX OPERATING TEMP 0C	GENERAL USE
1306	NR Gum Rubber	Black	40	Steam Cure Autoclave	70	Pulley lagging, general lining and hose tube applications.
1306	NR Gum Rubber	Tan	40	Steam Cure Autoclave	70	Pulley lagging, general lining and hose tube applications.
1312	NR	Cream	40	Steam Cure Autoclave	70	Tie Gum for EBONITE backing. Not recommended for any other purpose.
1410	NR	Black	46	Steam Cure Autoclave	70	Pulley lagging & moderate chemical and impinging abrasion application.
1498	NR	Black	50	Exhaust Steam Cure	70	Soft tank lining, moderate chemical and abrasion resistant.
1499	NR	Black	58	Exhaust Steam Cure	70	Medium tank lining, moderate chemical and impinging abrasion resistant.
1515	NR	Black	63	Steam Cure Autoclave	70	General purpose, pulley lagging, moderate chemical & high abrasion resistant.
1598	NR	Black	60	Steam Cure Autoclave	70	General purpose, pulley lagging, moderate chemical and high abrasion resistant.
1610	NR	Black	68	Steam Cure Autoclave	70	Engineering applications.
1613	NR	Black	63	Steam Cure Autoclave	70	Tank lining and general all purpose.
1923	NR - Ebonite	Black	SHORE D 80 +/-10	Steam Cure Autoclave	80	Higher chemical resistant tank lining especially for aqueous chlorine (oxidising) environment. Not suitable for Hydroflouric.
2618	SBR FRAS	Black	67	Steam Cure Autoclave	70	Certified FRAS rubber for pulley and idler lagging.
22734	NR/BR - AS MA Grade	Black	61	Steam Cure Autoclave	70	General purpose natural rubber sheet for applications that require cut and gouge properties with additional abrasion resistance (85 mm 3).
29690	NR	Black	64	Press Cure	70	Conveyor Belt refurbishment lines using a press for vulcanisation.
3514	Neoprene GP	Black	55	Steam Cure Autoclave	70	General chemical resistance and moderate petroleum.
3520	NR	Black	60	Steam Cure Autoclave	70	General purpose, pulley lagging and moderate chemical and high abrasion resistance (110 mm 3) lining applications.
3618	Neoprene FRAS	Black	67	Steam Cure Autoclave/Press	90	FRAS to petroleum products.
4515	Nitrile	Black	60	Steam Cure Autoclave	95	Oil resistant and moderate chemical and impinging abrasion resistant lining applications